TXF-125E Battery Operated Photoelectric Beam Sensor

Home page » Product » Wireless Alarm System » Takex (Japan) » TXF-125E. Đầu Báo Hồng Ngoại 4 tia, 100 mét, chạy pin, IP65

Description

TXF-125E Features:

LONG BATTERY LIFE

Approx. 5 years of battery life is possible with 4 pcs of recommended battery.
(Each 2 pcs for transmitter and receiver)
Possibility of longer battery life with extra batteries. (Max. additional 4 pcs)
when use LS 33600 (3.6V 17Ah) manufactured by SAFT.

BATTERY SHARING FUNCTION

This function is integrated in the sensor to enable sharing battery with universal wireless transmitter.
Low battery output voltage is adjustable with volume switch

DETECTION DISTANCE SELECTABLE

4 detection distance are selectable with a single unit.
[330'(100m) /245'(75m) /165'(50m) /82'(25m)]

LIGHTNING PROTECTION

This unit is insusceptible to induced lightning because of its battery operated system.

WIDE BEAM

With wider pitch between upper and lower beams, false alarms initiated by birds and falling leaves are drastically reduced.

IP65 HIGHEST RATING PROTECTION

In addition to wireless configuration, water tight bushings and seals maintain integrity of the device from water, insects and dust.

DUAL RING SIGHT

Enables better and clearer view for easy beam alignment.

BI DIRECTIONAL WIRELESS ALIGNMENT CHECKER (ER-02)

Even one person can accomplish system alignment easily to dramatically save the labor cost. (sold separately)

txf_125_e

Model	BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR
Model number	TXF-125E
Detection system	Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
Infrared beam	Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
Protection distance	Outdoor 330'(100 m) or less
Protection distance setting	82'(25m), 165'(50m), 247'(75m), 330'(100m) (4 distances selectable)
Distance margin (maximun arrival distance)	10 times 3300'(1000m)
Response time	50ms (0. 05sec.), 100ms (0.1sec.), 250ms (0.25sec.) , 500ms (0.5sec.) (4-level changeover)
Modulated beam frequency selection	4 channels
Power supply voltage	3.6VDC (recommended battery: SAFT lithium thionyl chloride battery LS33600)
Current consumption	750μA
	Transmitter : Approx.430μA (during protection)
	Receiver : Approx.320μA (during protection)
	(nomal temperature,3.6VDC)
Battery life	Transmitter: Approx. 5 years ((at normal temperature, with 2 recommended batteries, excluding a wireless transmitter)
Battery life	Receiver: Approx. 5 years (detects 100 times a day, at normal temperature, with 2 recommended batteries, excluding a wireless transmitter)
Alarm output (Receiver only)	Dry contact relay output form C, 30VDC 0.1A (resistive load)
Environment output (Receiver only)	Dry contact relay output form C, 30VDC 0.1A (resistive load)
Low battery output (transmitter and receiver)	30VDC 0.1A (resistive load), 30VDC 0.1A (resistive load)
Tamper output (transmitter and receiver)	Dry contact relay (N.C), 30VDC 0.05A (resistive load)
Power output (transmitter and receiver)	3.0VDC 50mA MAX
Beam adjustment	Horizontal: ±90°, Vertical: ± 20°
Alarm led	Red LED (Receiver) ON : when an alarm is initiated
Attenuation led	Red LED (Receiver) ON : when beam is attenuated
Ambient temperature	–13°F to+140°F (–25°C to+60°C) (No freezing or condensation) (The battery function may decrease at 0°C or less, or +40°C or more)
Functions	Sound check, Monitor jack Upper/lower beam switch Low battery indication Wireless alignment checker connection Battery saving, Repeat output, Battery sharing
IP rating	IP 65
Mounting position	Outdoor, Indoor
Weight	Transmitter : 52.5oz (1500g) (excluding batteries) Receiver : 54.3oz (1550g) (excluding batteries)
Appearance	Cover : PC resin Wine red Base : ASA resin Black