TX-124R Outdoor Flame Sensor for Wireless Systems

TX-124R detects ultraviolet rays contained in flames and activates an external output. It is compatible with most of major wireless transmitters powered by DC3V battery. The weather proof construction of the housing allows for use outdoors.
TX-124R has 2 sensitivity setting (H or L) and 4 detection timer (1, 6, 15 or 30 sec). A combination of the two parameters provides 8 sensitivity levels which enables the sensor to fit with various environments and conditions
TX-124R detects a flame of 60cm(2’75”) from 30m(66’) away.
Operation LED (can be disabled by DIP switch)
Battery holder for 2 x CR-123A
Area masking sheet

TX-124R

Model	TX-124R
Detection system	Ultraviolet rays detection (detected wave length 180~260nm)
Detection area	Distance 10m (33ft) max. (Gas flame of lighter in front of sensor approx. 7cm flame) 30m (100ft) max. (N-heptane flame on fire plate 15cm x 15cm approx. 60cm) Angle · Horizontal: approx. 100 degrees (60 degrees downward) · Vertical: approx. 75 degrees (15 degrees upward) Adjustment range · Horizontal 180 degrees by base unit · Vertical 90 degrees
Sensitivity adjustment	Sensitivity: H (100%), L (50%) (selectable) Detection timer: 1sec, 6sec, 15sec, 30sec (selectable)
Supply voltage	(Red/Black wires) DC3V (CR-123A)
Current consumption	Standby: 55μA max. / Detection: 1mA max.
Detection output	(Blue/White wires) Solid State Switch N.C, 3VDC 0.01A max. Output when detecting ultraviolet, Real time + delay time 2 sec
Operation LED	Detection: Red LED Real time + delay time 2 sec.
Ambient temperature	-20°C to +50°C (-4°F to +122°F)
Installation	Indoor/outdoor
Weight	Approx. 510g (17.9oz)
Appearance	Sensor part: PC resin (white) Bracket: AES resin (white)
Supplied accessories	· Tapping screw ∅6 x 30: 4pcs · Battery holder (2 x CR-123A): 1pc · Area mask seal: 1pc