PXB-50HF. Đầu báo hồng ngoại 4 tia, 4 tần số, 50m (ngoài trời), IP65.

  • 12.807.960 vnd
  • 12.807.960 vnd
  • Takex/ Japan
  • 12 Month
  • When there is no room for compromise, professional installers and specifiers can rely on the enhanced features of the new PXB Quad Beam range. For distances up to 50m (165ft) outdoor / 100m (330ft) indoor.

PXB-50HF Photoelectric Beam Sensor, Features:

DOUBLE MODULATION
Double modulated beams are designed to distinguish the external lights. It increases the reliability in the outdoor security system. (50,000 lux light immunity)

QUAD HIGH POWER BEAM
The beam power is 100 times of the minimum requirement.
The beam distance is 10 times of the described specification.
This high power beam maintains the ability to operate reliably in inclement weather.

WIDE BEAM
The pitch between upper and lower beam is wider than previous models; drastically reducing False alarms initiated by birds and falling leaves.

IP65 HIGHEST RATING IN THE INDUSTRY
Water tight bushings and seals maintain device integrity from water, insects, and dust; further inclusion of a breathable membrane prevents internal condensation from affecting performance.

ANTI-BIRD SPIKE
Keeps birds and small animals from roosting on
the sensor, maintaining a clear detection path for increased reliability.

DRIP-PROOF HOUSING
Channels the elements (rain and snow melt) away from the optical surfaces of the sensor, avoiding false alarms caused by beam attenuation.

ADVANCED RETICLE SIGHTING SYSTEM
Enables a faster and easier alignment process.

INCREASED VERTICAL ANGLE ADJUSTMENT
The horizontal is still ±90°
±20° Better accommodates alignment on uneven terrain, when compared to existing
models (±10°).

TARGET COLOR
Structure colors are tuned to the Peak Wavelengths of the Human Eye Response (Photopic eye response), to be easily targeted in the beam alignment process.

BI-DIRECTIONAL WIRELESS ALIGNMENT CHECKER
One person can accomplish system alignment in a fraction of the time; for dramatic savings on labor costs. (sold separately) . Bi Directional communication distance is max 200m.

LOW CURRENT CONSUMPTION
50% reduction in current consumption allows cost savings upfront (by reducing the required wire gauge on installation), and continues the savings for years to come with lower electrical consumption.

ECO-FRIENDLY
RoHS certified compliant: free from Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyl, and Polybrominated biphenyl ether.

LIGHTENING PROTECTION
Maximum Lightening induced surge protection to 10,000VDC (normal mode) and 15,000VDC (common mode)..

PXB

 Model  PXB-50HF
 Product type  Photoelectric Beam Sensor
 Detection system  Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
 Infrared beam  LED pulsed beam, Double modulation
 Protection distance  Outdoor 50m (165ft) or less
 Indoor 100m (330ft) or less
 Max. beam range   Outdoor 500m (1650ft) or less
 Indoor 500m (1650ft) or less
 Response time  50msec. to 700msec. variable (Standard : 50msec.)
 Supply voltage  12V to 30VDC (Non-polarity)
 Current consumption  30mA or less
 Alarm output  Dry contact relay output form C
 Action : Interruption time (min 2sec.)
 Contact capacity : 30V AC/DC, 1A (resistive load)
 Protective resistor
 Environmental output  Dry contact relay output form C
 Action : Output when weather conditions worsen
 Contact capacity : 30V AC/DC, 1A (resistive load)
 Protective resistor
 Tamper output  Dry contact relay (N.C.)
 Action : Activated when cover is detached
 Contact capacity : 30V AC/DC, 1A (resistive load)
 Protective resistor
 Alarm LED  Red LED (Receiver)
 ON : when an alarm is initiated.
 Attenuation LED  Red LED (Receiver)
 ON : when beam is attenuated.
 Functions  Modulated beam frequency selection (4-Channel)
 Tone indicator
 Environmental module
 Beam power selection
 Transmitting power adjustment
 Alarm memory indication
 Programmed AGC
 Auto-gain lock function
 Monitor jack
 Tamper
 Response time adjustment
 Upper / Lower beam switch
 Frost proof cover
 Ambient temperature range  -35°C to +66°C (-31°F to +151°F)
 Mounting positions  Outdoor (Perimeter protection)
 Wiring  Terminals
 Weight  Transmitter : 1400g (49oz)
 Receiver : 1470g (51.5oz)
 Appearance  PC resin (wine red)