PowerLink3. Mô đun nối mạng LAN

IP-Based Event Notifications

At its most basic, PowerLink3 offers a plug-and-play broadband IP event notification solution.  With more and more homeowners moving to VoIP communications, broadband has become an ideal method for cost-free alarm event notification delivery to the CMS. 
Visonic's PowerLink3 Internet-based home control system features built-in IP-based event notification capabilities. Simply plugging the PowerLink3 system into a free port on the home router, connects the alarm system to the IP receiver at the central station – with no need to configure the system or the router. This provides a true plug–and-play experience for both the security installer and the CMS. 
Utilizing PowerLink3 as an IP-based event notification solution requires that Visonic's PowerManage (IP management platform) be implemented as an IP receiver at the central station.

Image Alarm Verification Done the Right Way

As PowerLink3 is fully integrated with the PowerMaster home security system, it has the ability to send alarm-time images based on real motion detection from the NEXT CAM detector. This significantly reduces the cost and hassle of false alarms.
The system enables the CMS to receive image alarm verification information within seconds of the alarm-time, compared to the several minutes it takes with GPRS or PSTN-based alarm verification solutions. Moreover, alarm-time images can be forwarded to the homeowner's email or mobile phone for immediate viewing and verification. By the time the security service provider calls, the homeowner already knows if the person who activated the alarm is authorized to be there, or is an intruder. This means that the police or a central station guard is sent to the premises only when truly necessary.
Total Control of Home Security
PowerLink3 is offered with Visonic PowerMaster panels with PowerManage, which serves as an IP receiver in the CMS as well as a full grade service platform for consumer web services. 
By implementing PowerManage, a CMS can gain full control over the PowerLink3 service, including account and service management, messaging, and much more. PowerLink3 also allows a CMS to remotely maintain and configure the PowerMaster security system via the Visonic PowerManage system.

Offered as an internal module for PowerMaster version 17 or higher and PowerMax version 13 or higher

Provides IP-based event notifications to the CMS via Visonic's PowerManage

System accessible via Visonic mobile app or mobile/PC web browsers via PowerManage services

Provides alarm-time recorded video feeds from up to 10 Next CAM detectors, including the possibility to use the VOD (video on demand) feature from PowerManage

No router configuration required

No client software installation required

Does not require a fixed IP at the home premises

End-user event reporting via email and mobile messages*

Fully managed by Visonic's PowerManage (IP management platform)

Remote maintenance and configuration of the PowerMaster security system via PowerManage