PB-200F Photoelectric Beam Sensor, Outdoor 200m

Home page » Product » Alarm System » Beam Sensor (Takex-Japan) » PB-200F - Đầu báo hồng ngoại 4 tia, 200m ngoài trời.

Description

PB-200F Photoelectric Beam Sensor, Features:

4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]
*4 beams are "and-gated", which helps to prevent false alarms by
falling leaves and small animals.
*Active infrared transmission is exceptionally strong with a
maximum arrival distance ten times greater than the specified
protection distance.
*External light compensation circuit provides excellent tolerance
to sun light, automobile head lights, fluorescent light or mercury
light.

EASY BEAM ALIGNMENT
*Audible signal for alignment
Alignment tone aids in quick set-up of beams. The tone becomes
maximum at the peak beam level.
*Sensitivity attenuation LED lights when beam is attenuated,
which shows low sensitivity.
*Monitor jack output
*Target color
*Wide adjustment (horizontally ±90°,vertically ±10°

RoHS CERTIFIED COMPLIA
Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers.

AUTO-GAIN LOCK
Optimal sensitivity gain is automatically set at any coverage distance within the maximum protection distance. Auto-Gain lock is easily confirmed with sound check.

PROGRAMMED AGC
Sensitivity is automatically increased in bad weather to cope with fog, heavy rain, frost or snow.

ALARM MEMORY
Alarm memory LED located on receiver can be automatically reset.

PROTECTION AGAINST FROST/DEW
Special hoods attached on sensor cover keep beam protection continuing without interruption even when the cover is screened by frost or dew.

OTHER FEATURES
*Tamper output (transmitter and receiver)
*Polycarbonate cover excellent at anti-shock
*Optional accessories

Pb-200

Model	PB-200F
Product name	Photoelectric beam sensor
Detection system	Near infrared beam interruption system (4 beam simultaneous interruption)
Infrared beam	Double modulation pulsed beams by LED
Protection distance	Outdoor 200m (660ft) or less Indoor 400m (1320ft) or less
Max. arrival distance	Outdoor 2000m (6600ft) or less Indoor 2000m (6600ft) or less
Response time	50msec. to 700msec. variable (Standard : 50msec.)
Power supply	12V to 30V DC (non-polarity)
Current consumption	85mA or less at protection (max.120mA or less)
Alarm output	Dry contact relay : NO or NC (selectable) Reset : Interruption time + off-delay (approx.1.5sec) Contact capacity : 30V (AC/DC) 1A or less
Tamper output	Dry contact : NC Contact operation : Output when cover is detached Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED	Red LED (receiver) lights when an alarm is initiated
Sensitivity attenuation LED	Red LED (receiver) lights when beam reception attenuated
Functions	Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor jack, Target color
Beam adjustment	Horizontal : ±90°　Vertical : ±10°
Ambient temperature range	-31°F to +151°F (-35°C to +66°C)
Mounting position	Outdoor (IP55)
Wiring	Terminals
Weight	Transmitter : 42oz (1,200g)/ Receiver : 45.5oz (1,300g)
Appearance	Resin (wine red)