PA-8420E Passive Infrared Sensor, Vertical Curtain Protection

Home page » Product » Alarm System » PIR & Magnetic Switch (Takex- Japan) » PA-8420E. Đầu báo hồng ngoại quét mành đứng 8x20m, 4-8m, ngoài trời.

Description

PA-8420E Passive Infrared Sensor, Feature:

PROTECTION AREA ESPECIALLY DESIGNED TO PROTECT FROM HIGH MOUNTING POSITIONS
With the unique high-density protection field created by the 4 mirrors equipped inside the unit, it can be used with confidence to protect places with ceilings between 4 and 8 meters high.

SUITABLE FOR INDOOR AND OUTDOOR USE
With a rain-proof casing, these units are suitable for both internal and external applications.

STRONG HOUSING CASES
The casings of these units are made from AES resin which improves the unit's resistance to impact.
Ideal for use in locations such as sports halls where unit may be subjected to impact.

EXTERNAL APPLICATIONS
The units are constructed with weather-resistant seals to prevent water from entering.
(For exposed wiring, use water-proof grommet or conduit.)

FUNCTIONS
･ L/C (LED control) function
The unit is equipped with L/C function by which the LED function can be remotely activated/de-activated.
L/C function enables simple walk test functionality after unit is installed.
･ A/C (Area control) function
The unit is equipped with A/C function by which area coverage can be remotely disabled/enabled.

OTHER FEATURES
･ N.C./N.O. output silent relay
Photo MOSFET switch relay engaged at alarm output.
･ Tamper Switch
The units have independent tamper outputs activated by removal of cover.
･ Pulse count selectable (Only applicable to PA-8410E)
Pulse count is selectable for one, two, three and four counts.
･ Sensitivity adjustment
Sensitivity is adjustable for 60%, 80%, 100% and 120%.

Model	PA-8420E
Detection system	Passive infrared
Coverage	Vertical Curtain. 20m (66ft) Max. 30 Zones(60 beams)
Coverage adjustment	Vertical : 24°/ Horizontal : +/-15°
Mounting position	Indoor or outdoor ceiling
Installation height	13'(4m) to 26'(8m)
Supply voltage	9 to 30V DC (non-polarity)
Current consumption	30mA Max.
Alarm output	・Dry contact(semi-conductor) output (N.C./N.O.) ・24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω) ・Warm up : Approx.1min.(No alarm condition) ・One-shot output at detection (Approx.2sec.) ・Continuously output when detecting functional troubles. ・Continuously output when detecting low supply voltage.
Tamper output	・Dry contact output : (N.C.) ・30V (AC/DC) 0.1A (resistive load) ・Tamper output : Real time output
Alarm LED	・Red LED ・Blinks during warm up (Approx. 1min.) ・One shot lights (Approx. 2sec.) at detection ・Continuously lights when detecting functional troubles. ・Continuously lights when detecting low supply voltage.
Functions	・Trouble alarm ・Low supply voltage alarm ・Tamper signal ・LED control(L/C) ・Area control(A/C) ・Alarm LED(ON/OFF) ・Sensitivity adjustable for 60/80/100/120% Pulse count selectable for 1/2/3/4
Ambient temperature range	+4F to +122F(-20C to +50C) without condensation
Wiring	Terminals
Weight	33.25oz (950g)
Appearance	Body : AES resin , Cover : PE resin
Accessories	Water-proof grommet : 1pce, tapping screw : 2pcs