PA-480S. Passive Infrared Sensor, Super wide angle redius 8m, Indoor wall

Home page » Product » Alarm System » PIR & Magnetic Switch (Takex- Japan) » PA-480S - Đầu báo hồng ngoại

Description

PA-480S Passive Infrared Sensor, Feature:

WALL MOUNT 180° COVERAGE
Two twin elements cover 90° each to create a full 180° pattern. Each 90° area can be vertically adjusted up or down to create the required coverage pattern.

TROUBLE ALARM -LOW VOLTAGE-
When sensor detects a drop in supply voltage, a trouble alarm is initiated.
*Alarm LED disable(ON/OFF)
*Signal count selectable(2 signals / 4 signals)
*Anti-creep zone

PA-48S PA-48S2

Model	PA-480S
Detection system	Passive infrared (Quad, Fuzzy logic)
Coverage	Super wide angle 80 (26ft) max.
Sensitive zone	32 pairs (64)
Mounting positions	Indoor wall/pillar
Supply voltage	9 to 18V DC (non-polarity)
Current consumption	32mA Max.
Alarm output	Dry contact relay (N/C, N/O selectable) Reset: Approx. 2sec.30V (AC/DC), 0.1A Max. (protective resistance 3.3Ω buil-in)
Tamper output	Dry contact (NC) 30V (AC/DC) 0.1A max.
Alarm LED (Red)	Blinking at warm-up Lighting at alarm Lighting at memory activated Lighting at trouble alarm (LED disable)
Memory control	Controls memory indication/reset with terminal M/C
LED control	Controls alarm LED indication with terminal L/C
Trouble alarm	Low power voltage: monitors drop in power voltage Operate: initiate trouble alarm
Ambient temperature	-10°C to +50°C (+14°F to +122°F) without condensation
Wiring connection	Terminals
Weight	165g (5.8oz)
Accessory	Fixing screw (4 x 30): 2pcs/ Area lock screw: 1pc