PA-470L - Đầu báo hồng ngoại

  • 2.222.880 vnd
  • 1.852.400 vnd
  • Takex/ Japan
  • 12 Month
  • New generation wall mount passive infrared sensor

QUAD ELEMENT+ NEW FUZZY LOGIC PROCESSING SYSTEM
"Fuzzy Logic" is the state-of-the-art processing system that simulates the human decision process as it compares various information such as size, temperature differential, etc. to determine the criteria for an alarm condition. This reduces false alarm while maintaining a high detection capability.

PATTERN SELECTABLE WITH INTERCHANGEABLE LENS
Wide angle / long range pattern is selectable during installation by convenient fresnel lens replacement. Spare long range lens is included in package. Zone changeover switch sets the detection pattern to match the lens pattern when lens is changed.

TROUBLE ALARM -LOW VOLTAGE-
When sensor detects a drop in supply voltage,the alarm relay and LED latches in alarm until voltage is restored to its proper level.

ALARM MEMORY
Units contain special circuitry to indicate an alarm has been activated during armed period. Especially useful when more than one unit is used per zone.

REMOTE LED CONTROL
Allows the LED to be enabled/disabled via the control panel.
*Alarm LED disable (ON/OFF)
*Alarm contact selectable (N.C./N.O.)
*Sensitivity adjustment (60%,80%,100%,120%)
*Zone changeover (Wide angle/long range)
*Anti-creep zone

PA-470L

Model  PA-470L
 Detection system  Passive infrared (Quad, Fuzzy logic)
 Coverage  Wide angle: 16m (53ft) max.
 Long range: 20m (66ft) max.
 Sensitive zone  Wide angle: 22 pairs (88)
 Long range: 2 pairs (8)
 Mounting positions  Indoor wall/pillar
 Supply voltage  9 to 18V DC (non-polarity)
 Current consumption  28mA Max.
 Alarm output  Dry contact relay (N/C, N/O selectable)
 Reset: Approx. 2sec.30V (AC/DC), 0.1A Max. 
 (protective resistance 3.3Ω buil-in)
 Tamper output  Dry contact (NC) 30V (AC/DC) 0.1A max. 
 Alarm LED (Red)  Blinking at warm-up 
 Lighting at alarm 
 Lighting at memory activated
 Lighting at trouble alarm (LED disable)
 Memory control  Controls memory indication/reset with terminal M/C
 LED control  Controls alarm LED indication with terminal L/C
 Trouble alarm  Low power voltage: monitors drop in power voltage
 Operate: initiate trouble alarm
 Ambient temperature  -10°C to +50°C (+14°F to +122°F) without condensation
 Wiring connection  Terminals
 Weight  165g (5.8oz)
 Accessory  Fixing screw (4 x 30): 2pcs; Long range lens